.png)
- 产品特点
- 技术规格
● 单缸、四冲程、水冷、电脚启动发动机
● 通过燃烧分析、优化S/D比、点火曲线，确保燃烧更充分，性能较同类产品提高8-10%，且有效降低超越离合器故障
● 采用离心缸套技术，缸套同铝合金接触面积增加1.5倍，强度和寿命提升2倍
● 采用双PVD活塞环，硬度提高30%，提高耐磨性，有效减少烧机油、机油消耗快现象
● 采用外置脚起动结构，彻底解决市场痛点（铜套磨损）
● 采用碳纤摩擦片+压盘嵌钢片结构，抵墙冲击次数增加2倍
● 采用大容量多级过滤技术，提升70%净化能力，寿命增加2倍
● 采用水道优化+大水泵+大水管结构，流量提升60%
● 采用两侧放油结构，保养更简便
● 强化挡齿，强度提升30%
● 强化副轴轴承，外径增大至φ33，寿命提升35%
● Single cylinder, four stroke, water cooled, electric start engine.
● Through combustion analysis, optimization of S/D ratio, ignition curve, to ensure more full combustion, performance is improved by 8-10% compared with similar products, and effectively reduce overrunning clutch failure.
● Using centrifugal cylinder liner technology, the contact area between cylinder liner and aluminum alloy is increased by 1.5 times, and the strength and life are increased by 2 times.
● The use of double PVD piston ring, hardness increased by 30%, improve wear resistance, effectively reduce the burning oil, oil consumption phenomenon.
● External kick starting structure, completely solve the market pain points (copper sleeve wear).
● Carbon fiber friction plate + platen embedded steel plate structure, the impact times against the wall increased by 2 times.
● Using large capacity multistage filtration technology, improve the purification capacity by 70%, and increase the life by 2 times.
● Waterway optimization + large water pump + large water pipe structure, the flow rate increased by 60%.
● The use of two sides of the oil discharge structure, easier maintenance.
● The counter shaft bearing is strengthened, the outer diameter is increased to φ33, and the service life is increased by 35%.
● Strengthened counter shaft bearing, outer diameter increased to φ33, life increased by 35%.
外特性曲线 WIDE OPEN THROTTLE CURVES（TT210A水冷）
外特性曲线 WIDE OPEN THROTTLE CURVES（TT260A水冷）
外特性曲线 WIDE OPEN THROTTLE CURVES（TT300A水冷）
悬挂图 INSTALLATION DIMENSIONS